What Is Colloidal Silver? 

Colloidal silver is a completely natu­ral, liquid mineral supplement found in almost every health food store in North America. It is much like mineral water, except that in this case, the only minerals in the water are tiny, sub-microscopic particles of pure silver.

Pure silver, by itself, has been known for thou­sands of years to have powerful, broad-spectrum infection-fight­ing qualities. So when the process for making colloidal silver was discovered in the late 1800s, shortly after Edison harnessed electricity, it immediately became a popular natural infection-fighting agent among doctors and clinical researchers. It was used both topi­cally on cuts, burns and infections, and internally as a powerful remedy for a wide range of infectious illnesses and diseases.

Colloidal silver is made through a simple electrical process that pulls sub-microscopic particles of silver from a larger pure silver electrode immersed in water. These tiny, invisible silver particles are held in suspen­sion in the resulting solution by the electrical charge left on each atom after being sin­tered away from the silver electrode.

When ingested, these tiny particles of silver travel throughout your body just like any other mineral supplement before being excreted through your body’s normal channels of elimination. However, as the silver particles come into contact with pathogenic microorganisms that are susceptible to silver, the silver inactivates and kills the microbes, thus preventing them from colonizing, spreading and caus­ing disease. Hence colloidal silver’s grow­ing popularity as a powerful mineral sup­plement designed to aid the body in con­trolling infections.

 Many articles of interest below:

 Colloidal Silver Vanquishes Drug-Resistant Superbugs     Here's the big secret the FDA and the major drug companies don't want you to know: Colloidal silver quite handily destroys the pathogens behind the vast majority of antibiotic-resistant superbug infections.   And now that antibiotic-resistant superbug infections have become the fourth leading cause of death in the world, it's more important than ever that this news is spread far and wide.  

Of course, the big drug companies don't want people to know about colloidal silver's astonishing effectiveness against antibiotic-resistant superbugs. They have other plans – big, money-making plans – which I'll explain below.   click link to read more..... 



Colloidal Silver and the Ebola Hysteria - The potentially good news is this: Way back in 2008 the federal government itself demonstrated the fact that antimicrobial silver is, under certain conditions which I'll explain below, extremely effective against Ebola and other hemorrhagic fever viruses. 

read more.. https://ca-mg5.mail.yahoo.com/neo/launch?.rand=6ckttam6g9qrd


Colloidal Silver Doubles Shelf Life of Milk, Say Researchers



17 Articles on Colloidal Silver Household Uses



Even More Unusual Uses for Colloidal Silver - 



How Colloidal Silver Cured a Nasty Case of Food Poisoning from Eating Raw Honey -

http://thesilveredge.com/how-colloidal-silver-cured-a-nasty-case-of-food-poisoning-from-eating-raw-honey.shtml#.VFZse_Z0yR0   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Dr Rima's Ebola/Nanosilver Nonsense (Opinion) - The Ebola scare continues, and now nanosilver is being touted by Dr. Rima Laibow as the one and only "cure" for the dread virus.

But as I pointed out in my previous two articles on this subject, there's no clinical proof nanosilver "cures" Ebola. In other words, in lab studies, there's never been a single human being cured of Ebola by nanosilver.  read more.. https://ca-mg5.mail.yahoo.com/neo/launch?.rand=6ckttam6g9qrd


Infection-Fighting Silver Gains New Respect from News Media



Another "Health Guru" Mindlessly Trashes Nanosilver

https://ca-mg5.mail.yahoo.com/neo/launch?.rand=6ckttam6g9qrd  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Colloidal Silver Beats Fungal Infections Fast   

https://ca-mg5.mail.yahoo.com/neo/launch?.rand=6ckttam6g9qrd  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

SILVER prevents replication of VIRUSES

Check this out:  Dr. Oz and World Famous Heart Surgeon Recommend Colloidal Silver

Interesting video to watch re: long time uses of silver     www.life-enthusiast.com/silver-c-67.html


Silver has been used for centuries to fight infections, and is now becoming a popular form of alternative medicine. Silver can be used as an antibiotic: the microbial creatures cannot develop a resistance to silver, which is the case with yeast based antibiotics.
Some very interesting success stories from Colloidal Silver users.



USING COLLOIDAL SILVER WITH A NEBULIZER      http://server.publishers-mgmt.com/semk/secm/2012/5/csu/279/more/ 


 Colloidal Silver should be stored in a glass container, in a dark location, at room temperature.  If storing in a cupboard or closet, avoid an outside wall, that may become too cold or too hot during season changes. 


Be sure to cover you glass storage container with some Saran (plastic) wrap, before putting lid on - Condensation will form on underside of lid, and as it's not actually 'Silver' water, MOLD may form!  A piece of saran wrap will prevent that from happening.


Silver use in Hospitals

There are numerous medicinal uses of silver. For instance in many American Hospitals a few drops of silver are placed in the eyes of the baby as soon as they are born. Silver and especially silver bandages are used extensively in a hospital's Burn Unit. There is at least one patent issued for the use of silver in an air purification system. Some examples; "The Sharper Image" ad in USA Today of 2-22-06, for a food container that uses nano silver as a preservative. And in the February- March 2006 issue of Townsend Letter for Doctors & Patients, contains a five page article on silver solution as being the final solution to H5N1 Bird flu.  It has an impressive bibliography of 72 items.



 The two articles below, although a bit lengthy, are very important to understand, especially the first one which explains about ...


why the PPMs of Colloidal Silver, that you often find on bottles of commercially sold Colloidal Silver, means basically nothing as to the potential benefits you'd derive from it.  What is most important to know about the Colloidal Silver you may take, or buy, to clear up an infection or use for maintenance against becoming ill, is in fact the PARTICLE SIZE or size of the MICRONs of silver in any given solution.  The smaller the Micron size, the more far reaching the Silver is within our bodies to reach the most minute cells and capillaries, so it can get at and kill off the invading germs, be they bacterial, viral, fungal or molds.  Understanding this will benefit you in your quest to purchase a better Colloidal Silver that will bring you the most benefits overall.  And the costs need not be so overwhelming, as to cause you to, not use the Silver unless you're seriously ill, due to being influenced by how much each teaspoon will cost.  Example: common cost:  4 oz (120 ml) bottle $25.00 and up, for products sitting on store shelves for who knows how long.  Shelf life of Colloidal Silver is approximately a year if properly stored.   


Why Higher PPM Is Not Always Better

The so-called "ppm" (i.e., parts per million) of colloidal silver is a widely used, but also equally as widely misunderstood, designation.

For example, many people believe that PPM somehow designates the strength, or the microbial killing power, of colloidal silver. Others believe it represents the number of silver particles in a certain volume of water. But nothing could be further from the truth.

The ppm designation is also very often referred to as a representing the concentration of silver in the water. But even this is not completely accurate.


What Is PPM?

So what exactly is "ppm," as applied to colloidal silver, and what does it designate?

By definition 1 ppm of colloidal silver is one milligram of silver deposited in one liter of water (1,000 ml), otherwise designated as 1 mg/l. So it is, in reality, a measurement of the overall weight of the silver in a liter of water, not the number of silver particles!

Why is this so important to understand? Because the actual weight (i.e., ppm) of silver in a colloidal silver solution has very little bearing on its effectiveness. Instead, it is how finely divided the total silver content is, that ultimately determines its effectiveness. Here's why...


Finer Silver Particles for Increased Reach and Potential Killing Power

For example, an American Eagle silver dollar weighs about an ounce, which is approximately 28,349 milligrams (mg.). In a liter of water, that would be 28,349 ppm. Now relatively speaking, that's one heckuva lot of silver. But if you dropped a silver dollar into a one liter glassful of water and drank it, swallowing the silver dollar along with the water, it would have very little therapeutic value, except perhaps as it made its way through your intestinal tract where it would likely come into contact with a few colonies of pathogens and kill some of them. But overall, it would simply make its way through the intestines, and be excreted through the normal channel of elimination, coming out essentially whole in the feces. Because it is one whole piece, rather than being finely divided into many thousands or even millions of sub-microscopic pieces, it has zero absorbability into the body's cells, tissues and organs, and therefore only a comparatively miniscule opportunity to kill pathogens.

But what if you took just a tiny fraction of that one ounce pure silver coin, and finely divided it up into many thousands of tiny silver particles? For example, let's say you were to take just one milligram of silver from that silver dollar mentioned above. That's just 1 ppm of silver in a liter of water. And it represents just 1/28,349th of the total weight of that silver dollar. And let's say you were to divide that relatively tiny 1 mg. piece of silver into 500,000 miniscule particles. Since it only takes one particle of silver to disable one pathogen, you would now have 500,000 different opportunities to kill pathogens. So even though this is only a tiny fraction of the amount of silver contained in the silver dollar, it represents 500,000 times more anti-microbial killing power in the human body!

What's more, by finely dividing that 1 mg. piece of silver, it can now be easily absorbed by the body, and rapidly distributed throughout the body, which is to say, it can much more easily travel through the body, reaching into the organs and tissues and cells where pathogens colonize.

So by finely dividing that tiny 1 mg. piece of silver, you gain many multitudes greater opportunities to kill pathogens than you would have from placing the full one-ounce (28,349 ppm) coin into a liter of water and swallowing it whole!

So while the one ounce silver coin gives you a much greater level of silver by total weight in a liter of water (which is the definition of "ppm"), the dramatically smaller 1 mg. piece of silver that has been finely divided into 500,000 tiny pieces gives you literally five hundred thousand times more anti-microbial "killing power." This is what we mean when we say the ppm - or total weight of the silver in the colloidal silver solution -- does not matter nearly as much as how finely divided that silver is.

Now, let's say you divide that 1 mg. piece of silver even more finely, into five million tiny silver particles instead of only 500,000. Since smaller silver particles are more easily absorbed by the body and distributed into the body's organs, tissues and cells, you have now made the silver ten times more efficient than before. Instead of only 500,000 opportunities to kill pathogens, you would now have a full five million different opportunities to kill pathogens in the body. Yet you would still have the same exact amount of silver in your body - 1 mg per liter of water, or 1 ppm!

And if you further divided up that 1 mg. piece of silver into ten million very fine silver particles, you would achieve absolutely phenomenal absorb-ability by the body, and distribution throughout the body's organs, tissues and cells. And you would give yourself a whopping ten million different opportunities to kill pathogens. Yet you are still using the exact same amount of silver by weight - 1 mg. per liter of water, or 1 ppm!

Obviously, a 1 ppm (1 mg. per liter) colloidal silver solution in which the silver has been finely divided into ten million silver particles is going to be far more effective than a 1 ppm (1 mg. per liter) colloidal silver solution in which the silver was only divided into five million silver particles. So you see, the finer you divide that tiny 1 mg. piece of silver, the wider its reach throughout the body, and the more anti-microbial killing power the same amount of silver provides!

Do you see now why we say that the "ppm" designation can be quite misleading? Instead of "ppm," you really need to know what the particle size of the silver is, in conjunction with the ppm.



The Importance of Knowing the Size of Silver Particles in Your Colloidal Silver Solution

The particle size of silver in a colloidal silver solution is usually (though not always) expressed in terms of a measurement known as microns. We will use the micron designation here, simply because it is more widely used. Another popular designation is "nanometer." A micron is simply 1,000 nanometers. So one nanometer is .001 microns.

To help put this in perspective for you, a human hair is about 100 microns wide, while a typical red blood cell is only about 7 microns wide. Most bacteria are somewhere between 4 and 15 microns wide. A virus, on the other hand, can be as small as .01 micron. Most colloidal silver products are measured in fractions of a micron. For example, a properly constructed conventional colloidal silver generator can produce silver particles as low as .05 microns in size...a very high-quality commercially produced colloidal silver product might contain silver particles as low as .005 microns in size...and the new Micro-Particle Colloidal Silver Generator can produce silver particles as low as .0008 microns, which is eight ten-thousands of a single micron - many times smaller than a tiny virus!

Okay, let's say you are looking at two different hypothetical colloidal silver solutions. Both of them boast 10 ppm, which as you have now learned, is simply 10 mg. worth of silver in a liter of water. But one of these hypothetical colloidal silver solutions says its particles are .05 microns in size, and the other says its particles are .005 microns in size. Everything else being equal (price, amount of colloidal silver solution in the bottle, etc.) which of these two colloidal silver solutions represent the best value in terms of absorbability into the human body, and potential antimicrobial killing power?

Obviously, the colloidal silver solution with the more finely divided particles is the best choice, everything else being equal.

Why? Because silver particles measuring .005 microns are ten times smaller than silver particles measuring .05 microns. What's more, there would be approximately ten times as many silver particles in the .005 micron solution, since we know these two colloidal silver solutions contain the same silver weight (i.e., they are both 10 ppm). So you get ten times more silver particles, and ten times smaller silver particles, in the colloidal silver solution with silver particles designated as being .005 microns in size. Yet both colloidal silver solutions have exactly the same amount of silver in them, by weight!

This is why we say that knowing the particle size as well as the ppm is absolutely crucial in terms of being able to judge the potential value and effectiveness of a colloidal silver solution.



Why a Higher PPM Batch of Colloidal Silver Can Be Less Effective

Than a Lower PPM Batch!

It should be obvious by now that the more tiny "slices" of silver you have in the same volume of water, the more opportunities you have to kill pathogens, and the greater reach throughout the human body those tiny silver particles will have, due to the simple fact that smaller particles are far more easily absorbed by the body, distributed throughout the body's organs, tissues and cells, and excreted afterwards. So you can have the same amount of silver by weight, but by dividing it into finer and finer particles you vastly increase its reach and effectiveness!

It should also be obvious by now that the designation of a higher ppm on a colloidal silver solution does not by itself equate to greater effectiveness. You can have a much lower ppm (i.e., much lower weight of silver in a liter of water), but if that silver is divided many times more finely than a colloidal silver solution carrying a much higher ppm, it is the lower ppm solution that will provide you with the greater benefit, rather than the higher!

This is not double-talk. It may sound counter-intuitive. But it is simple, irrefutable science.

Let's say you have two colloidal silver products: Product number one is 20 ppm (i.e., 20 mg. total weight of silver per liter of water) with silver particles that are .01 microns in size. And product number two is only 10 ppm (i.e., 10 mg. total weight of silver per liter of water) but has silver particles that are .001 microns in size.

The 20 ppm colloidal silver solution obviously has two times more silver by weight than the 10 ppm solution.

But...the silver particles in the 10 ppm colloidal silver solution are 10 times smaller than the silver particles in the 20 ppm solution. So while a one ounce dose of the 20 ppm colloidal silver solution would contain twice the total silver by weight than a one ounce dose of the 10 ppm colloidal silver solution, the one ounce dose of 10 ppm would actually contain five times more silver particles!

This means you would get five times more potential anti-microbial killing power, and five times greater absorption and assimilation throughout the body, by taking one ounce of the 10 ppm solution, than you would by taking one ounce of the 20 ppm solution.

It is amazing. But it is absolutely true. And it is a testament to the fact that depending solely upon the "ppm" of a colloidal silver solution to judge its effectiveness is ignorance at best.


The Micro-Particle Colloidal Silver Generator...

That is exactly why the Micro-Particle Colloidal Silver Generator has become the #1 selling colloidal silver generator in America over the past five years. By more finely dividing the silver particles (see a Transmission Electron Microscopy photograph here), the colloidal silver solutions produced by this unit provide far superior benefit than many of the higher ppm solutions produced by conventional colloidal silver generators, as well as many of the the higher ppm solutions purchased in health food stores.

The Micro-Particle Colloidal Silver Generator is limited to producing solutions up to 10 ppm in a single three hour batch (however, you can let the machine run longer for higher ppm), but the silver particles it produces can be as low as .0008 microns. That's eight ten-thousands of a single micron in size! Compare that to a good conventional colloidal silver generator which might produce silver particles that are approximately .05 microns (that's five one-hundredth of a micron) in size, and you can see that the Micro-Particle Colloidal Silver Generator is clearly the way to go if smaller particle size, greater anti-microbial killing power and superior absorption and distribution throughout the body (not to mention superior elimination from the body) are important to you!

Indeed, while silver particles produced by a conventional colloidal silver generator are frequently visible under a standard laboratory microscope operating at only about 20,000x magnification, it takes a multi-million dollar Transmission Electron Microscope operating at a whopping 175,000x magnification to even begin to bring the tiny silver micro-particles produced by the Micro-Particle Colloidal Silver Generator into view!

The bottom line is this: What really counts is NOT the "ppm" designation of your colloidal silver solution, but how finely the total silver content has been divided, which is to say, how many tens of millions of tiny sub-microscopic particles are available per dose.

That's why it isn't necessary to have excessively high ppm (i.e., high silver weight) in a colloidal silver solution to gain extraordinary benefits from colloidal silver. It is only necessary to divide very small amounts of silver more finely. And that's exactly what the new Micro-Particle Colloidal Silver Generator does!


If you've read this far, and would like to find out more about availability of fresh made micro-particle Colloidal Silver at 10 ppms and with a particle size of approximately .0008 microns, and live in the local area of Niagara Region, feel free to contact the owner of Apple Tree for more information.  myappletreeherbs@yahoo.ca

If you live outside the Niagara region, and would be interested in finding out more about the Micro-Particle Generator referred to in these articles, (and perhaps purchase one), please go here to read more.  http://www.thesilveredge.com/  Anyone wishing to obtain a US address to have packages shipped to for pick up in the US, see  http://www.usaddressinc.com/  

How the New Micro-Particle Colloidal Silver Generator Differs From Other Colloidal Silver Generators

The new Micro-Particle Colloidal Silver Generator represents a bona fide breakthrough in colloidal silver-making technology. The main difference between the new Micro-Particle Colloidal Silver generator and standard colloidal silver generators is particle size. While standard colloidal silver generators produce silver particles that can be so large the human body has great difficulty absorbing and utilizing them, the new Micro-Particle Home Colloidal Silver Generator produces highly bio-available silver particles as low as .0008 microns so small, they are about as close to being "dissolved" silver particles as you can get.

In the past, there have been only a few ways to achieve the production of silver micro-particles. These methods have proven to be expensive and time-consuming, requiring the use of equipment found only in professional laboratories. Colloidal silver manufacturers basically have to make batches of standard colloidal silver through a high-voltage process utilizing upwards of 10,000 volts, and then use expensive laboratory equipment to extract the particles from the solution and separate the larger from the smaller particles before reconstituting the smaller silver particles back into solution. Some colloidal silver manufacturers used a sophisticated centrifuge technology to achieve this. Others have used more conventional laboratory forms of separation such as filtration. There is also a `chemical milling' variation, where larger colloids are reduced in size with an acid bath. This is why commercial bottled colloidal silver products that truly contain micro-particles of silver are always very expensive to purchase as much as $59 for a tiny 8-ounce bottle.

On the other hand, thanks to an astonishing new breakthrough in colloidal silver-making technology, the new Micro-Particle Colloidal Silver Generator allows you to produce true micro-particle colloidal silver -- quickly and easily, in the comfort and privacy of your own home -- for about 36 cents a quart!.

Creating sub-microscopic silver micro-particles with a standard low-voltage DC-current colloidal silver generator was initially thought to be impossible. But what a bright electrical engineer named Paul Johnson discovered several years ago was the fact that you can do so, if you utilize a slower and more stable rate of silver particle production than what is normally used, while simultaneously eliminating excessive electrical conductivity in the water during the entire colloidal silver-making process. To accomplish this, you must be able to achieve five specific goals:

  • One, you must start the colloidal silver-making process with virtually mineral-free, non-conductive water, which means using pure, high-quality steam-distilled water only.

  • Two, you must be able to slow the rate of silver particle production by significantly reducing the generator's voltage-to-amperage ratio;

  • Three, you must be able to prevent the agglomeration (i.e., bonding) of silver particles into larger particles by constantly aerating and agitating the water (i.e., bubbling).

  • Four, you must be able to prevent the "bridging" of silver particles between the two silver electrodes.

  • And five, you must be able to dramatically limit the buildup of electrical conductivity within the solution during the entire colloidal silver-making process.

Here is how the new Micro-Particle Home Colloidal Silver Generator achieves these five specific goals, with the result that true colloidal silver micro-particles as low as .0008 microns in size can now be produced with a simple, easy-to-operate, low-voltage DC-current colloidal silver generator:

Built-in water resistance tester for making sure your water is non-conductive enough to produce silver micro-particles -- The built-in water resistance tester in the new Micro-Particle Colloidal Silver Generator allows you to know immediately whether the water you are using is superior non-conductive steam-distilled water, or inferior mineral-laden and highly-conductive water. If, at the very start of the colloidal silver-making process the green light on the Micro-Particle Generator box glows brightly, then the water is too highly mineralized (i.e., too conductive) for making silver micro-particles. If the green light on the box glows only dimly or even not at all, then you can rest assured that the water has low-to-no mineral content (i.e., extremely low conductivity) and is thus perfect for making silver micro-particles. In short, the built-in water resistance tester allows you to know right from the start whether or not the distilled water you are using is of a sufficiently high-quality to produce silver micro-particles. To our knowledge, no other colloidal silver generator on the market today provides you with this crucial benefit

Slower rate of production One of the most overlooked rules of making high-quality colloidal silver is that the faster your unit produces silver particles, the larger they will tend to be. Most standard colloidal silver generators are calibrated for greater speed of colloidal silver production, rather than for smaller particle size. The significantly higher voltage-to-amperage ratio used in standard colloidal silver generators literally "blows" chunks of silver off the positive silver electrode, rather than allowing very tiny particles to slowly trickle off. This automatically produces silver particles that are frequently too large for the human body to properly utilize. What's more, as these larger silver particles accumulate in the solution during the colloidal silver-making process, they vastly increase the electrical conductivity of the solution. This in turn increases the speed at which silver particles leave the positive silver electrode, which results in even larger silver particles entering the solution. In other words, it is a vicious cycle of ever increasing particle size. This is why the new Micro-Particle Colloidal Silver Generator utilizes a significantly longer running time (3 hrs.) for colloidal silver production, at a fraction of the voltage-to-amperage ratio used by the manufacturers of most standard colloidal silver generators. By dramatically reducing the voltage-to-amperage ratio, the silver particles merely trickle off the positive silver electrode at a much slower rate and at a dramatically smaller particle size right from the start. And they stay that way throughout the entire three-hour colloidal silver making process!

Built-in aerator (i.e., bubbler) -- The built-in aerator keeps the water fully aerated and agitated during the entire colloidal-silver making process. This has a very important three-fold purpose: First, the constant aeration and agitation of the water during the entire colloidal silver-making process helps prevent the agglomeration (i.e., bonding) of silver particles as they leave the positive silver electrode. With standard colloidal silver generators, the silver particles tend to accumulate in the water not far from the positive silver electrode, because there is no agitation of the water to cause their wider dispersal. From the very outset of the colloidal silver-making process this fosters particle agglomeration (i.e., the formation of larger silver particles through particle bonding). But with the new Micro-Particle Colloidal Silver Generator, the silver particles are immediately dispersed into wide circulation within the solution by the bubbling action of the built-in aerator. This makes it virtually impossible for silver particles to accumulate near the positive silver electrode and form larger particle agglomerates. Once the individual silver particles are dispersed throughout the solution, the positive electrical charge they carry becomes dominant, and they go into Brownian motion. In other words, from that point forward they are able to repel each other and remain suspended in the solution indefinitely without agglomerating!

Secondly, the constant aeration of the water helps break up the electrical "bridging" that always takes place between the positive and negative silver electrodes. "Bridging" simply means that silver particles tend to get caught in the electrical interplay between the two silver electrodes, and accumulate there, forming larger particle agglomerates that are difficult for the body to utilize. This is one of the biggest problems with standard colloidal silver generators. But the Micro-Particle Colloidal Silver Generator solves this problem completely by aerating and agitating the water constantly during the entire colloidal silver-making process. The "bridging" between the two silver electrodes is thereby broken up completely, and the resulting particle agglomeration is eliminated. While some manufacturers of colloidal silver generators utilize a clumsy motorized stirring mechanism to accomplish this, no other colloidal silver generator we know of does so as efficiently and effectively as the new Micro-Particle Colloidal Silver Generator, with its' built in aerator.

Third, the constant aeration of the water prevents excessive electrolysis from building up in the solution. This is important, because when using a standard colloidal silver generator, the electrical conductivity of the entire colloidal silver solution is increased dramatically as more silver particles enter the water. In turn, this increased electrical conductivity causes additional silver particles to be drawn from the positive silver electrode at a faster rate and at a significantly larger size. But because the new Micro-Particle Colloidal Silver Generator keeps the entire colloidal silver solution super-aerated during the colloidal-silver making process, the buildup of excessive electrical conductivity is dramatically mitigated. Why? Because air is one of nature's least conductive elements. Super-aerating the water prevents excessive electrical conductivity from building up, which in turn prevents additional silver particles from being drawn from the positive silver electrode at an excessively fast rate that results in excessively large particles. Only the new Micro-Particle Colloidal Silver Generator offers you this highly beneficial innovation!

A Brief Word About "Constant Current" Regulators

Some colloidal silver generator manufacturers attempt to resolve the problem of electrolytic buildup in the colloidal silver solution by adding a complex piece of computer technology called a "constant current regulator" to their generators. This technology monitors the buildup of electrical conductivity in the colloidal silver solution, and concurrently reduces the generator's electrical current as electrolysis builds up in the solution. This works pretty good, to a certain extent. But it is an overly-complex technological solution to a very simple problem. By simply aerating the water to help prevent the buildup of excessive electrical conductivity, you altogether eliminate the need for complex computer technology in a colloidal silver generator. What's more, when someone adds relatively complex computer technology to a colloidal silver generator, the customer always ends up with one more highly sensitive electronic component that could burn out, short out, or otherwise go bad, and you'd never know it was not working. On the other hand, with the new Micro-Particle Colloidal Silver Generator, if the aeration goes out you know it immediately, because the bubbling will stop. In short, with the new Micro-Particle Colloidal Silver Generator you never have to worry about whether or not sensitive computer equipment has shorted out or is otherwise not working correctly due to moisture, overheating, power surges, being bumped or dropped, or for some other reason. With "constant current" generators, you are simply going by faith that everything is still working correctly. But with the new Micro-Particle Colloidal Silver Generator, if something goes wrong (and it rarely does), you will know it immediately, and we will fix it. Ours is a simple yet elegant solution to the problem of electrolytic buildup. Best of all, the aeration technology employed in the new Micro-Particle Colloidal Silver Generator keeps the silver particles uncommonly small throughout the entire colloidal silver-making process. You don't get progressively larger silver particles during the colloidal silver-making process, because the aeration suppresses excessive electrical conductivity throughout the entire process.

While there are other factors that make the new Micro-Particle Colloidal Silver Generator superior to standard colloidal silver generators, the above-described factors are the most important ones.


Colloidal science has come a long way in the past few decades. Perhaps the most important area of study has been with the "phase transition" of colloids. Phase transition is a term used to describe how colloidal particles can self-assemble into a variety of ordered phases. Simply put, it is the ability to form `complex ions' that can successfully interact with cellular membranes in the human body. The study of colloidal phase transitions is currently an area of intensive scientific research. One reason for all the hoopla is because of a better understanding of the molecular architecture of -- and biochemical processes within -- cellular membranes.

Cellular membranes play important roles in all living organisms. One can think of a cellular membrane as a door with a lock. In order for a substance to pass or interact with the membrane, it needs a key. The mechanism (key) that controls this is the molecular architecture of the particular substance. If the key fits, the substance can pass or interact. This area of study has lead to the development of more potent and effective pharmaceuticals, for example.

Silver (Ag) is known as a `transition element'. This means it has good phase transition characteristics, because of its ability to form stable complex ions. This gives silver the "potential" to interact with cellular membranes in the same way as other important complex ions such as vitamin B-12, chlorophyll, and the heme component of hemoglobin, in which the central metal ions are cobalt, magnesium, and iron. All of these, and many other important nutrients, are complex ions. However, in order for a silver particle to be as freely interactive in the body as a natural complex ion like vitamin B-12, it must have the same characteristics as B-12. Meaning it must be very small (nanoparticle) and have a stable electric charge. These are the fundamental principles on which the new Micro-Particle Colloidal Silver Generator was designed.

The patent-pending Micro-Particle Colloidal Silver Generator is a true nano-particle colloid system. A nano-particle (aka micro-particle) colloid system is any process that produces ultra-small colloids, less than 1 nm or .001 microns, with a stable electrical charge. While most colloidal silver generators cannot meet that standard, the new Micro-Particle Colloidal Silver Generator far surpasses that standard by producing silver particles as low as
.0008 microns in size, and leaving them with a strong and stable electrical charge. What's more, the electrical charge on the tiny silver micro-particles is so strong, the silver remains in suspension in solution indefinitely. Most other colloidal silver generators produce significantly larger silver particles that hold a comparatively weak electrical charge. This leaves the silver particles "precipitating," or falling out of suspension in the solution within a matter of weeks or months at most.

In short, the new Micro-Particle Colloidal Silver Generator simply cannot be matched by standard colloidal silver generators. We hope this adds to your understanding of what makes the Micro-Particle Colloidal Silver Generator so much more beneficial than the standard colloidal silver generators being sold today.



Disclaimer: This content is provided here for informational purposes only.  We make no medical claims that the herbs, herbal products or 'commonly suggested uses' of herbs on this website are intended to diagnose, prevent, cure or treat any health problem or disease.  Do not attempt to self-diagnose or treat. If you have, or suspect you have, an illness or medical condition, check with a qualified Health Practitioner, your physician, Naturopath, or other qualified health professional for diagnosis, guidance and supervision prior to using herbs for self-treatment, and before using any herbal treatment.

   Use of these reference pages signifies acceptance of this notice.

Exercise caution, do the research to separate the legitimate from the suspect information about herbal remedies.  If in doubt about using a particular herbal product, don’t try it.  Any reliance you place on any information on this website is strictly by your own discretion and at your own risk.   The owners of this site and the ISP carrier that they use are not liable for any outcome that might occur thru the use of information on this site.  You are responsible for yourself and in reading this you release the owners of this site and the ISP carrier that they use from any liability.